If you are having indoor air quality issues or if your heating system isn’t properly controlling the temperature inside your home, you may have an issue with your heating system. However, instead of calling a professional technician, you may be able to find out what the issue is on your own. Indeed, DIY winter home heating inspection is easy – you just need a good eye and you need to know where to look. If you do find issues, there is good chance that you will be able to make repairs on your own as well. Here are some DIY winter home heating inspection tips.
Check the filter. The first place you want to look when conducting a DIY heating inspection is your filter. Typically, you want to swap out your old filter for a new one every couple of months or – monthly if you use your HVAC system all the time. Over time, your filter can become clogged with dust and debris, which can cause your entire system to break down. All you have to do is check the filter – if it is dirty, or if it has been a while since you changed it, you want to swap it out with a new one.
Check the blower motor. The blower motor is an essential component of your HVAC system. Essentially, the motor has a little fan attached to it and it is responsible for providing the heat that your system sends throughout the ductwork to warm your home. Ideally, you want to check the blower for any major obstructions. One of the best ways to check the blower motor is to use a mirror to check the inside of your unit.Check the burners. The burner plates are basically where the pilot lights come out of. If the burners are too greasy or if there is an obstruction, the pilot light may be subdued, which can cause all sorts of issues. Not only can a blockage cause natural gas to leak into your home, but it can also cause your heating system to work inefficiently. The best way to fix this issue is to turn the main gas valve off and then clean the burners.
Check the overall cleanliness of your unit. It is also important to look at the general cleanliness of your heating unit. If this system looks too dusty, you may want to think of cleaning and dusting. Any dirt or grease can cause your system to work more slowly and not provide the heating power your home needs in the winter.
Check the air around your heating system. On top of checking for visual signs of dirt, you also want to detect for invisible signs. For instance, carbon monoxide can be a major issue with HVAC systems – even small, barely detectable levels can cause problems. The best way to check for carbon dioxide is to use a specialized detection kit or detector alarm. In the end, carbon monoxide is a deadly gas that strikes without warning, so you want to find the source and remove it before taking any other measures.